Sauropod Vertebra Picture of the Week

Michelle Stocker with an apatosaur vertebra (left) and a titanosaur femur (right), both made from foam core board.

In the last post I showed the Brachiosaurus humerus standee I made last weekend, and I said that the idea had been “a gleam in my eye for a long time”. That’s true, but it got kicked into high gear late in 2021 when I got an email from a colleague, Dr. Michelle Stocker at Virginia Tech. She wanted to know if I had any images of big sauropod bones that she could print at life size and mount to foam core board, to demonstrate the size of big sauropods to the students in her Age of Dinosaurs course. We had a nice conversation, swapped some image files, and then I got busy with teaching and kinda lost the plot. I got back to Michelle a couple of days ago to tell her about my Brach standee, and she sent the above photo, which I’m posting here with her permission.

That’s OMNH 1670, a dorsal vertebra of the giant Oklahoma apatosaurine and a frequent guest here at SV-POW!, and MPEF-PV 3400/27, the right femur of the giant titanosaur Patogotitan, from Otero et al. (2020: fig. 8). (Incidentally, that femur is 236cm [7 feet, 9 inches] long, or 35cm longer than our brachiosaur humerus.) For this project Michelle vectorized the images so they wouldn’t look low-res, and she used 0.5-inch foam core board. She’s been using both standees in her Age of Dinosaurs class at VT (GEOS 1054) every fall semester, and she says they’re a lot of fun at outreach events. You can keep up with Michelle and the rest of the VT Paleobiology & Geobiology lab group at their research page, and follow them @VTechmeetsPaleo on Twitter.

Michelle’s standees are fully rad, and naturally I’m both jealous and desirous of making my own. I’ve been wanting a plywood version of OMNH 1670 forever. If I attempt a Patagotitan femur, I’ll probably follow Michelle’s lead and use foam core board instead of plywood — the plywood Brach humerus already gets heavy on a long trek from the house or the vehicle.

Speaking of, one thing to think about if you decide to go for a truly prodigious bone is how you’ll transport it. I can haul the Brach humerus standee in my Kia Sorento, but I have to fold down the middle seats and either angle it across the back standing on edge, or scoot the passenger seat all the way forward so I can lay it down flat. I could *maybe* get the Patagotitan femur in, but it would have to go across the tops of the passenger seats and it would probably rest against the windshield.

Thierra Nalley and me with tail vertebrae of Haplocanthosaurus (smol) and the giant Oklahoma apatosaur (ginormous), at the Tiny Titan exhibit opening.

As long as I’m talking about cool stuff other people have built, a formative forerunner of my project was the poster Alton Dooley made for the Western Science Center’s Tiny Titan exhibit, which features a Brontosaurus vertebra from Ostrom & McIntosh (1966) blown up to size of OMNH 1331, the largest centrum of the giant Oklahoma apatosaurine (or any known apatosaurine). I wouldn’t mind having one of those incarnated in plywood, either.

I’ll bet more things like this exist in the world. If you know of one — or better yet, if you’ve built one — I’d love to hear about it.

References

• Alejandro Otero , José L. Carballido & Agustín Pérez Moreno. 2020. The appendicular osteology of Patagotitan mayorum (Dinosauria, Sauropoda). Journal of Vertebrate Paleontology, DOI: 10.1080/02724634.2020.1793158
• Ostrom, John H., and John S. McIntosh. 1966. Marsh’s Dinosaurs. Yale University Press, New Haven and London. 388 pages including 65 absurdly beautiful plates.