Things remain frantic on the Sauropocalypse tour. Today, we were back at the BYU Museum of Paleontology, working on four or five separate projects. Here’s Matt, photographing broken bone of the iconic Supersaurus cervical BYU 9024, while a pallet of Big Pink Apatosaur cervicals wait for attention in the background:

2016-05-11 15.42.40

You’ve seen this bone before – I first posted on it 8 years ago this month, and it turned up again here and here. It is still the longest known vertebra of any animal that has ever lived.

And here’s Mike, getting Jensen’s sculpture of the same vertebra down from storage to compare it to the original:

IMG_9232

In Jensen’s (1985) original description of this vertebra – which he at first referred to Ultrasauros – the only relevant illustration he included was one of the model, so it was good to see this bit of history in the flesh (Jensen did include photos of the actual bone in later papers). We’ll show the two vertebrae, real and sculpted, side by side in a future post.

References

  • Jensen, J. A. 1985. Three new sauropod dinosaurs from the Upper Jurassic of Colorado. Great Basin Naturalist 45, 697-709.

photo1

I was at the Natural History Museum of Los Angeles County yesterday to do some research in the ornithology collection. After lunch I was working on this pelican skeleton and I thought, “Geez, there is just no way to do this thing justice with still photos. I should make a video.” Here it is. You’ll want to see it full-screen–this being my first time out making a video, I didn’t realize that I was holding the phone the wrong way for efficient viewing on other devices.

The specimen is LACM Ornithology 86262. I’m posting this video with the knowledge and kind permission of the ornithology collection staff.

For previous things in this vein, please see:

If you like it that stuff like this exists, please support your local natural history museum, especially the LACM, which has some really fantastic education and outreach programs.

OLYMPUS DIGITAL CAMERA

Now considered a junior synonym of Supersaurus, on very solid grounds.

Incidentally, unlike the neural spines of most non-titanosaurian sauropods, the neural spine of this vertebra is not simply a set of intersecting plates of bone. It is hollow and has a central chamber, presumably pneumatic. Evidence:

OLYMPUS DIGITAL CAMERA

Sauroposeidon in 3D

April 18, 2014

Sauroposeidon meet Sauroposeidon

I was in Oklahoma and Texas last week, seeing Sauroposeidon, Paluxysaurus, Astrophocaudia, and Alamosaurus, at the Sam Noble Oklahoma Museum of Natural History, the Fort Worth Museum of Science and History, the Shuler Museum of Paleontology at SMU, and the Perot Museum of Nature and Science, respectively. I have a ton of interesting things from that trip that I could blog about, but unfortunately I have no time. Ten days from now, I’m off to Colorado and Utah for the Mid-Mesozoic conference and field trip, and between now and then I need to finish up my bits on three collaborative papers, get my summer anatomy lectures posted for internal peer review here at WesternU, and–oh yeah–actually write my conference talk. Fun times.

BUT after being subjected to the horror of the Yale Brontosaurus skull, I figured you all deserved a little awesome.

Photographing Sauroposeidon 2014-04-07

So here’s me getting one of 351 photos of the most posterior and largest of the Sauroposeidon jackets (this is not the awesome, BTW, just a stop along the way). This jacket holds what I once inferred to be the back half of C7 and all of C8. Now that Sauroposeidon may be a somphospondyl rather than a brachiosaur, who knows what verts these are–basal somphospondyls have up to 17 cervicals to brachiosaurids’ probable 13 (for a hypothetical view of an even-longer-necked Sauroposeidon, see this probably-prophetic post by Mike). The vertically-mounted skeleton in the background is Cotylorhynchus. Cotylorhynchus got a lot bigger than that–up to maybe 6 meters long and 2 or 3 tons–and was probably the largest land animal that had ever existed back in the Early Permian. Photo by OU grad student Andrew Thomas, whom you’ll be hearing about more here in the future.

I couldn’t crank the model myself on the road, thanks to the pathetic lack of processing power in my 6-year-old laptop (which will be replaced RSN). Andy Farke volunteered to do the photogrammetricizing with Agisoft Photoscan, if only I’d DropBox him the pictures. Here’s a screenshot from MeshLab showing the result:

Sauroposeidon lateral PLY 10 - 6 and 9 blended

And my best taken-from-overhead quasi-lateral photograph:

Sauroposeidon C8 jacket lateral photo 2014-04-07

If you’re curious, the meter stick at the top is actually one meter long, it just has the English measurement side showing. The giant caliper at the bottom is also marked off in inches, and it is open to 36.0 inches (it didn’t go to 1 meter, or I would have used that). You can tell that there is some perspective distortion involved here since 36 inches on the caliper is 1380 pixels, whereas the 39.4-inch meter stick is only 1341 pixels. Man, I hate scale bars. But they make good calibration targets.

Incidentally, after playing around with the model in orthographic mode in MeshLab, the distortions in the photos of the vertebrae themselves just scream at me. Finally, finally, I can escape the tyranny of perspective. Compare the ends of the big wooden beam at the top of the jacket to get a feel for how much the two views differ.

Working on Sauroposeidon again after all this time made me seriously nostalgic. I love that beast. I don’t think I’m exaggerating when I say that those vertebrae are the most gorgeous physical objects in the universe. Also, an appropriately huge thank-you to preparator Kyle Davies (of apatosaur-sculpting fame), collections manager Jen Larsen, and Andrew Thomas again for help with wrassling those verts around, and for sharing their thoughts and advice. Thanks also to curators Rich Cifelli and Nick Czaplewski for their hospitality and for the go-ahead to undertake this work, and to Andy Farke for generating the model.

I’ll have a lot more to say about this stuff in the future. I didn’t go to all this work just for giggles. For a long time I’ve had a hankering to do a paper on the detailed anatomy of Sauroposeidon, based on all of the things that I’ve noticed in the last decade that didn’t make it into any of the early papers. And now there’s the proposed synonymy of Paluxysaurus with Sauroposeidon. And “Angloposeidon” needs some attention–Darren and I have been thinking about writing “Angloposeidon II” for years now. And…well, plenty more.

So, loads more to come, but not for the next few weeks. Eventually I’ll be publishing all of this–the photos, the 3D models, the whole works. Stay tuned.

UPDATE a few days later

Man, I am frazzled, because I forgot to include the moral of the story: if I can do this, you can do this. There are good, free photogrammetry programs out there–Peter Falkingham published a  whole paper on free photogrammetry in 2012, and posted a guide to an even better program, VisualSFM, on Academia.edu. Even Agisoft Photoscan is not prohibitively expensive–under $200 for an educational license. MeshLab is free and has hordes of good free tutorials. For the photography itself, you basically just build a virtual dome of photos around an object. If you need more instructions than that, Heinrich has written a whole series of tutorials. It doesn’t take a fancy camera–I used a point-and-shoot for the Sauroposeidon work shown here (a Canon S100 operating at 6 megapixels, if anyone is curious). What are you waiting for?

Illustration talk slide 39

Illustration talk slide 40

Illustration talk slide 41

Illustration talk slide 42

Illustration talk slide 43

The Sauroposeidon stuff is cribbed from this post. For the pros and cons of scale bars in figures, see the comment thread after this post. MYDD is, of course, a thing now.

Previous posts in this series.

Reference:

Wedel, M.J., and Taylor, M.P. 2013. Neural spine bifurcation in sauropod dinosaurs of the Morrison Formation: ontogenetic and phylogenetic implications. Palarch’s Journal of Vertebrate Palaeontology 10(1): 1-34. ISSN 1567-2158.

Giraffe neck FMNH 34426 articulatedThe cervical series of Giraffa camelopardalis angolensis FMNH 34426, articulated by Mike and me and photographed by Mike back in the summer of 2005, cropped and composited by me recently, not previously posted because there’s just too much cool stuff, man. But we’re working on it.

By the way, if you want the details on this critter:

FMNH 34426 specimen tag

UPDATE April 23, 2014: What a maroon–I completely forgot to report the size of this thing! When we articulated all the centra and measured them (without cartilage, obviously), we got a length of 171 cm. When we measured the centra individually, leaving off the anterior condyles, we got a length of 164 cm. I think the discrepancy can be explained by the relative shallowness of the posterior cotyles of the vertebrae–as you can see in the big image above, the condyles do not nest completely within the cotyles, so each one does contribute a little bit to the length of the neck.

The measurements of each vertebra, as recorded by Mike in my notebook in the FMNH mammalogy collections in 2005, are here:

Giraffa FMNH 34426 cervical and dorsal measurements

Just for completeness, I should note that in our neck cartilage paper (Taylor and Wedel 2013b), we found that cartilage added considerably to the length of the articulated neck in many amniotes. Based on the intervertebral spacing in horses, 1-2 cm of cartilage between these giraffe vertebrae doesn’t seem unreasonable, which would bring the length of the neck to perhaps 1.8 meters. Amazingly, this is only 75% of the longest giraffe necks on record, which are up to 2.4 meters (Toon and Toon 2003).

References

DSCN1178

Another raw photo from the road.

The Morrison fossils from the Oklahoma panhandle were dug up and prepped out by  WPA workers in the 1930s, and their preparation toolkit consisted of hammers, chisels, pen-knives, and sandpaper. (Feel free to take a minute if you need to get your nausea under control.) And whereas most Morrison fossils are much darker than the surrounding matrix, in the Oklahoma panhandle the bone and matrix are about the same color. Sometimes the prep guys didn’t know they’d gone too deep until they sanded into the trabecular bone. Or in this case, into the air spaces in the condyle of this anterior dorsal of Apatosaurus.

Still, we have lots of anterior dorsals of Apatosaurus, and very few we can see inside, and they’re too darned big to scan, so this gives us useful information that a more perfect specimen would not. So I salute you, underemployed dude from eighty-odd years ago. Thanks for showing me something cool.

OMNH 1331 is my new hero

March 24, 2013

Here’s an update from the road–get ready for some crappy raw images, because that’s all I have the time or energy to post (with one exception).

OMNH 1331

Here’s OMNH 1331. It’s just the slightly convex articular end off a big vertebra, collected near Kenton, Oklahoma, in 1930s by one of J. Willis Stovall’s field crews. I measured the preserved width at 45 cm using a tape measure, and at 44.5 in GIMP using the scale bar in the photo, which is up on a piece of styrofoam so it’s about the same distance from the camera as the rim of the vertebra (i.e, about 8 feet–as high as I could get and still shoot straight down). So whether your distrust runs to tape measures or scale bars in photos, I am prepared to argue that this sucker is roughly 45 cm wide.

OMNH 1331 internal structure

There’s admittedly not a ton of morphology here, but the size and the fact that the other side is hollow and has a midline bony septum show that it is a pneumatic vertebra from a sauropod, and given that the quarry it’s from was chock-full of Apatosaurus, and liberally salted with gigantic Apatosaurus, I feel pretty good about calling it Apatosaurus.

OMNH 1331 cloned and flipped

To figure out how wide the articular face was when it was intact, I duplicated the image and reversed it left-to-right in GIMP, which yields an intact max width of about 49 cm. That is friggin’ immense.

If we make the maximally conservative assumption that this is the largest centrum in the whole skeleton of a big Apatosaurus, then it has to be part of a dorsal vertebra. Here are the max diameters of the largest dorsal centra in some big mounted apatosaurs, taken from Gilmore (1936). The number in parentheses is how many percent bigger OMNH 1331 is.

  • A. louisae CM 3018 – 36.5 cm (34%)
  • A. parvus UWGM 15556 – 36.5 cm (34%)
  • A. sp. FMNH P25112 – 41 cm (20%)

OMNH 1331 lateral view

However, this might not be part of a dorsal vertebra. For one thing, it’s pretty convex, and Apatosaurus dorsals sometimes have a little bump but they’re pretty close to amphiplatyan, at least in the posterior half of the series. For another, I think that smooth lower margin on the right in the photo above is part of the rim of a big pneumatic foramen, but it’s waaay up high and pretty medial on the centrum, opening more dorsally than laterally, which I have seen a lot in anterior caudal vertebrae. Finally, Jack McIntosh went through the OMNH collections years ago and his identifications formed the basis for a lot of the catalogue IDs, and this thing is catalogued as the condyle off the back end of a proximal caudal.

Here are the max diameters of the largest caudal centra in those same mounted apatosaurs, again taken from Gilmore (1936). Once again, the number in parentheses is how many percent bigger OMNH 1331 is.

  • A. louisae CM 3018 – 30 cm (63%)
  • A. parvus UWGM 15556 – 32.5 cm (51%)
  • A. sp. FMNH P25112 – 39 cm (26%)

(Aside: check out the skinny rear end on A. louisae. ‘Sup with that?)

So whatever vert it’s part of, OMNH 1331 is damn big bone from a damn big Apatosaurus. There are lots of other big Apatosaurus vertebrae in the OMNH collections, like OMNH 1670, but OMNH 1331 is the largest centrum that I know of in this museum. Which is why you’re getting a post about most of one end of a centrum in the wee hours of the morning–it’s most of one end of an awesome centrum. And it pains me when people do comparison figures of big sauropod vertebrae, or lists of the “Top 10 Largest Sauropods”, and put in stuff like Argentinosaurus and Puertasaurus and Supersaurus, but leave out Apatosaurus. It was legitimately huge, and it’s time the world realized that.

For more on the giant Oklahoma Apatosaurus, see:

Reference

Gilmore, C.W. 1936. Osteology of Apatosaurus with special reference to specimens in the Carnegie Museum. Memoirs of the Carnegie Museum 11:175-300.

Sauroposeidon OMNH 53062 C7-C8 left side

Sauroposeidon holotype OMNH 53062, posterior half of ?C7 and all of ?C8 in left lateral view. Scale bar is in inches.

There’s a lot more Sauroposeidon material these days than there used to be, thanks to the referral by D’Emic and Foreman (2012) of Paluxysaurus and Ostrom’s Cloverly material and the new Cloverly material to my favorite sauropod genus. I’ve seen almost all of this material firsthand, but obviously the specimen I’m most familiar with is the holotype, OMNH 53062. It was the primary thing occupying my mind from the summer of 1996 through the spring of 2000, and it has remained a frequent object of wonder ever since.

The specimen was found lying on its right side in the field, so that side is in better shape, by virtue of having been more deeply buried and thus protected from the ravages of freezing and thawing and other erosional processes. When the jackets were taken out of the ground and prepared, the not-so-well-preserved left sides were prepped first. Then permanent support jackets were made on the left sides, the vertebrae were flipped onto their left sides, the field jackets were removed from their right sides, and the vertebrae were prepped on the right. They’ve been lying in their support jackets, left side down and right side up, ever since. (For more on the taphonomy and recovery of the specimen, see this post and Wedel and Cifelli 2005 [free PDF linked below].)

Now, if I had known what I was doing, I would have photographed the crap out of the left sides before the verts were flipped. But it was my first project and I was learning on the job, and that didn’t occur to me until later.

It also didn’t occur to me that, once flipped, the left sides would be effectively out of reach forever. But the vertebrae are extremely fragile. The bigger verts have cracks running through them, and the jackets flexed noticeably when we took them for CT scanning. I am worried that if we tried to flip the bigger verts today, they might just crumble. Even the surface bone is fragile. I remember once trying to get some dust off one of the verts with a vacuum cleaner hose, and watching in horror as some of the millimeter-thin external bone just flaked off and flew away. That was in the late 1990s, when the verts were still stored in the dusty, drafty WWII-era buildings that had housed the museum collections for ages. Now they’re in what I still think of as the “new” building, which opened in 2000, in a really nice modern collection room with climate and dust control, and I’ve never seen them with any noticeable dust.

Anyway, the left sides are now obscured by their supporting jackets and will remain that way for the foreseeable future. And I don’t have a complete set of photos of the left sides of the verts. But I do have one, of the back half of ?C7 and all of ?C8, and a scan of it appears at the top of this post. It’s a scan of a physical photograph because it was taken in late 1996 or early 1997–no-one I knew had a digital camera, and if you wanted a digital version of a photograph, you shot it on a film camera, had a big print made, and scanned that on a flatbed scanner.

Here’s another version with the vertebrae outlined:

Sauroposeidon OMNH 53062 C7-C8 left side - outlined

When I and everyone else thought that Sauroposeidon was a brachiosaur, I was pretty sure that these were C7 and C8, out of a total of 13 cervicals, just like Giraffatitan. And it still might be so–a future analysis might find that the newly-expanded Sauroposeidon is a brachiosaurid after all, and even if not, Gomani (2005) posited a primitive cervical count of 13 for titanosaurs. If that’s true, then possibly 13 cervicals are primitive for all titanosauriforms, and the increases beyond that–to 17 in Euhelopus and 14-17 in more derived titanosaurs like Futalognkosaurus and Rapetosaurus–were deviations from that primitive pattern.

But.

If Sauroposeidon was a basal somphospondyl, as posited by D’Emic and Foreman (2012) and as found in the phylogenetic analysis of D’Emic (2012), then maybe it was more like Euhelopus than Giraffatitan, and maybe it had more than 13 cervicals. (Note that D’Emic [2012] found Sauroposeidon to be a basal somphospondyl but outside the Euhelopodidae, so even in his analysis, Euhelopus could have gotten its extra cervicals independently of Sauroposeidon.) That’s an interesting prospect, since the 11.5-meter neck estimate for Sauroposeidon I made back in 2000 was based on the conservative assumption of 13 cervicals. If Sauroposeidon had more cervicals, they were probably mid-cervicals (nobody adds more dinky C3s, or stubby cervico-dorsals*–that would be silly), and therefore between 1 and 1.25 meters long. So if the individual represented by OMNH 53062 had 15 cervicals, as Mike hypothetically illustrated in this post, its neck might was probably more like 14 meters long, and if it had 17 cervicals, like Euhelopus and Rapetosaurus, its neck might have topped 16 meters–as long or longer than that of Supersaurus.

Now, I’m not saying that Sauroposeidon had a 16-meter neck. The conservative estimate is still 13 cervicals adding up to 11.5 meters. But the possibility of a longer neck is tantalizing, and can’t be ruled out based on current evidence. As usual, we need more fossils.

Happily, now that Sauroposeidon is known from Oklahoma, Texas, and Wyoming, and is one of the best-represented EKNApods instead of one of the scrappiest, the chances that we’ll find more of it–and recognize it–are looking good. I will keep my fingers firmly crossed–as they have been for the last 17 years.

* Radical pedantry note: of course we have very good evidence of sauropods getting more cervical vertebrae by recruiting dorsals into the cervical series. So, for example, 13 cervicals and 12 dorsals are supposed to be primitive for neosauropods, but diplodocids have 15 and 10, respectively–the obvious inference being that the first two dorsals got cervicalized. So in this narrow meristic sense, sauropods definitely did add cervicodorsals. But my point above is about the morphology of the verts themselves–once diplodocids had those two extra cervicals at the end, the former cervicodorsals were free to become more “cervicalized” in form. So effectively–in terms of the shapes of their necks–diplodocids added mid-cervicals.

References

Plateosaurus is pathetic

January 16, 2013

DSCN5593-giraffatitan-vs-plateosaurus

This photograph is of what I consider the closest thing to the Platonic Ideal sauropod vertebra: it’s the eighth cervical of our old friend the Giraffatitan brancai paralectotype MB.R.2181. (previously known as “Brachiosaurusbrancai HM S II — yes, it’s changed genus and specimen number, both recently, but independently.)

And if you look very carefully, down at the bottom, you can see the same vertebra, C8, of the prosauropod Plateosaurus. Pfft.

This photo was taken down in the basement of the Museum für Naturkunde Berlin, on the same 2008 trip where Matt took the “Mike in Love” photo from two days ago. For anyone who didn’t recognise the specific vertebra I was in love with in that picture, shame on you! It is of course our old friend the ?8th dorsal vertebra of the same specimen, which we’ve discussed in detail here on account of its unique spinoparapophyseal laminae, its unexpectedly missing infradiapophyseal lamina and its bizarre perforate anterior centroparapophyseal laminae.